Product Brief
The Q6 is an 0.8-ton ultra-compact, zero-tail mini-excavator purpose-built for congested city sites, indoor renovation, landscaping and greenhouse tasks. At only 600 mm wide it slips through standard doorways. A zero-tail swing radius and a fuel-efficient diesel engine deliver reliable power with minimal noise. One-touch start, intelligent throttle and a quick-coupler let any operator master digging, grabbing, drilling or sweeping within five minutes.
Q6 Mini Excavator – Product Datasheet (2025 Edition) – Diesel Only
Detailed Description
• Ultra-compact agility
– 600 mm undercarriage, zero-tail swing radius for blind-spot-free work against walls.
– Foldable ROPS lowers overall height to 1 150 mm for easy elevator or van transport.• Proven diesel power
– Yanmar 3TNV70 water-cooled three-cylinder, EU Stage V compliant, consumes just 0.9 L/h.
– Low-noise tuning keeps sound pressure below 86 dB(A) for urban night work.• Smart & simple
– 10-inch touchscreen with CAN-bus diagnostics and service reminders.
– Auto-idle saves up to 12 % fuel and reduces engine wear.
– One-hand hydraulic quick coupler swaps buckets, breakers, augers or sweepers in 30 s.• Maintenance friendly
– Rear hood opens fully; all daily filters and service points are at ground level.
– Tool-free access to battery, hydraulic tank and cooling pack.• Safety certified
– ROPS/TOPS certified structure and double hold valves on boom and arm.
– Emergency stop switch within easy reach.Typical uses: cable trenches, interior demolition, nursery planting, greenhouse fertilizing, property maintenance.
Parameter
| Item | Diesel Version |
| Operating weight | 800 kg |
| Engine / Motor | Yanmar 3TNV70 |
| Emission standard | EU Stage V |
| Battery capacity | — |
| Fuel / Energy consumption | 0.9 L/h |
| Swing speed | 9 rpm |
| Travel speed | 0–2.2 km/h |
| Track width | 180 mm rubber |
| Standard bucket capacity | 0.022 m3 |
| Max digging height | 2 350 mm |
| Max dumping height | 1 650 mm |
| Max digging depth | 1 350 mm |
| Max vertical digging depth | 1 000 mm |
| Min swing radius | 680 mm (zero tail) |
| System pressure | 16 MPa |
| Fuel / Hydraulic tank | 15 L / 12 L |
| Charging time | — |
| Noise level | 86 dB(A) |
| Overall dimensions (L×W×H) | 2 450 × 600 × 1 150 mm (folded ROPS) |
| Coupler interface | ISO 3519 A |
| Certification | CE / ROPS / TOPS |
Floor washer V750S
CTO X7
Floor washer V860
Floor washer V530
EN
